ENC TECHNOLOGY

Feature

• It can make Micro Display inspection and re-examination by applying various optical systems
• It can perform automatic inspection by linking inspection program/algorithm and control
• We responded to rigid Micro Display inspection by developing various inspection stages
• We optimized the inline production by applying CIM Program
• We provide vibration reduction solution

Feature

• Adjusting the nonlinearity of brightness compared to the display output
• Setting the target value (L, x, y) according to the determined Gamma value
• Compensating for brightness and color distortion through accurate calibration
• Fast and accurate compensation through an optimized algorithm

Feature

• Defect analysis through precise Mura phenomenon measurement for each pattern
• Calculation of brightness compensation data for each pixel through an algorithm
• Fast and accurate compensation through circuit compensation and re-verification procedure

Feature

• Checkup of the quality by measuring the color, brightness, contrast ratio, etc. of the display
• Early detection of problems such as defects and uniformity issues
• Continuous quality improvement by reflecting evaluation results in the production process

Feature

• The current and voltage is inspected at a high speed through the multi-contact of precision probe units
• EL optical inspection and judgment are made at a high speed with optimal detector
• We measure it by applying self-developed precision Multi Power Source
• We conduct the automatic precision control through Auto Focus and Alignment

• EL(Electro Luminescence): Light emission through electric energy

A. Loader/Unloader

• It is installed before and after the inspection facility for input/discharge/transfer
• It connects the logistics of front facility and inputs the pallets at the same time
• It checks the presence and loading status of cells on the tray using the vision
• It has the cleaning option at the input end
• It is controlled by PC/PLC

B. Stacker

• Equipment that separates good(OK) and defective(NG) products after inspection and loads them separately in trays or cassettes
• It separately stacks the OK and NG trays
• It checks the presence and loading status of cells on the tray using the vision
• It is controlled by PC/PLC

C. Buffer facility

• Equipment that plays the role of buffer or re-input required for logistics operation
• It checks the presence and loading status of cells on the tray using the vision
• It is controlled by PC/PLC

Feature

• Temperature rise/fall speed 1℃/min
• Option to choose water-cooling/air-cooling type
• Option for customer to adjust to Internal size and appearance/No. of channels
• Options for various measurement environments
• Constant temperature/humidity type : Temperature-40℃~100 ℃(±1.5 ℃), Humidity 30~95% (±3%)
• Low/high temperature type : -40℃~100 ℃(±1.5 ℃)

Feature

• The electrical characteristics of the Micro Display TEG cell can be precisely analyzed by measuring the voltage/current applied to the cell
• We have the consistency data and evaluation S/W so as to evaluate the life characteristics of the cell
• It can respond to various samples
• We perform optical measurement using Photo Diode/
  Spectroradiometer, and utilize the optimal evaluation
  program.
  (Light intensity, luminance, spectrum measurement)
• Using the self-developed precision power module, we secure the consistency of evaluation data with minimal noise
• We can make the independent conditional test for each channel
• There are various measurement environment options
  
• Photo Diode type (Chamber)
  : Room temperature, high temperature(25°C~120°C),
  high/low temperature(-40°C~120°C)
• Spectroradiometer type (Peltier) : Room temperature, high temperature(25°C~100°C)

Feature

• The optical characteristics of Micro Display are analyzed as an image with an optimal detector
• It performs precise measurement through vibration prevention, noise separation, Auto Alignment,
  and Auto Focus functions
• It applies the calibration by magnification for micro optical measurement
• It holds the S/W for measuring and evaluating various EL characteristics

• EL(Electro Luminescence): Light emission through electric energy

Feature

• The characteristics of Micro Display TEG Cell can be precisely evaluated by analyzing the light intensity according to
  the aging time of cell.
• It provides various measurement environment options and recipe programs according to inputting conditions for
  each time period
• It is equipped with precise multi-channel control power module developed by us as well as noise minimizing function

Feature

• It can respond to various detectors(Spectroradiometer, Photometer, etc.) for each measurement item
• It can operate in automatic/manual modes by evaluation standard(VESA, TCO, ISO-13406, etc.)
• It can respond to various panels from mobile use ones to ultra-large ones over 100" as well as customer options

(Option for Full Auto)

• The samples are automatically input, aged, measured, and discharged
• Simultaneously with the measurement, aging work is executed on the sample to be measured.
• Aging Zone and Measurement Zone are divided and controlled separately(PC/PLC)

• Mobile : Including Watch
• DID(Digital Information Display)

Feature

• It can acquire the data fast
• It makes precision measurement with high accuracy and repeatability
• It performs a various analysis through application of different frequencies
• It has the control program optimized for evaluation